Clutches
Contact us
Other Products
Other Products

 

 various types of products like freewheels, brakes, shaft-hub-connections
various types of products like freewheels, brakes, shaft-hub-connections

Freewheels

Backstops

Automatic protection against reverse running of conveyor belts, elevators, pumps and fans.
- Normal torques up to 880000 Nm.
- Bores up to 640 mm.

Overrunning Clutches

Automatic engaging and disengaging of drivers.
- Normal torques up to 880000 Nm.
- Bores up to 640 mm.

Indexing freewheels

For gradual feed of materials.
- Normal torques up to 160000 Nm.
- Bores up to 300 mm.

Housing freewheels

Automatic engaging and disengaging for multi-motor drives for installations with continuous operation.
- Normal torques up to 24400 Nm.
- Shafts up to 110 mm.

- Are used for Overrunning Clutches.

Cage Freewheels
For installation between customer-supplied inner and outer rings.
- Normal torques up to 93000 Nm.
- As used as Backstops, Overrunning Clutches and Indexing Freewheels.


Brakes

Industrial Brakes
spring activated pneumatically, hydraulically, electromagnetically or manual released.
- Clamping forces up to 65000 N.
- Automatic or manual adjustments to counter friction block wear.

Industrial Brakes
Pneumatically activated spring released.
- Clamping forces up to 39000 N.
- Manual adjustments to counter friction block wear.

Industrial Brakes
Hydraulically activated non-releasing or spring released.
- Clamping forces up to 200000 N.
- High safety against leakage.
- Easy change of friction blocks.

Clamping Units
Spring activated hydraulically or pneumatically released. For secure and precise positioning of piston rods.
- Holding forces up to 200000 N.
- Holding forces transmissible in both directions of movement.

Shafts-Hub-Connections

Two-part Shrink Discs
External clamping connection for simple and secure mounting without torque wrench.
- Shaft diameters between 
24 mm and 390 mm.
- Transmissible torques up to 1110000 Nm.

Two-part Shrink Discs
External clamping connection for the fastening of hollow shafts on solid shafts.
- Shaft diameters between 
14 mm and 360 mm
- Transmissible torques up to 517000 Nm.

Cone clamping Elements
Internal clamping connection in small dimensions for high torques.  
- Shaft diameters between 
5 mm and 600 mm
- Transmissible torques up to 1186000 Nm.

Star and clamping Discs
Shaft-Hub-Connection for frequent clamping and release.
- Shaft diameters between 
5 mm and 100 mm
- Transmissible torques up to 5200 Nm.

Star Spring Washers
Axial spring element for reloading of ball bearings.
- Pressing forces upto 1180 N.

- Protection of bearings subject to vibration when non-rotating.

 various types of products like overload clutches, couplings, precision clamping fixtures
various types of products like overload clutches, couplings, precision clamping fixtures

 

Overload Clutches

Torques Limiters with Rollers
Reliable overload protection for tough operating conditions.
- Limit torque 6 Nm up to 335 Nm.
- Speed range up to 1500 min-1

Torques Limiters with Screw Face
With double or single rollers. Through ratcheting or disengaging, also for 360º synchronous running.
- Limit torque 8 Nm up to 10000 Nm. 
- Speed range up to 6000 min-1

Torques Limiters with Balls
Reliable overload protection with maximum response accuracy. Also backlash free.  
- Limit torque 2.5 Nm up to 2000 Nm. 
- Speed range up to 3300 min-1

Torques Limiters with Friction Linings
RIMOSTAT Torque Limiter for constant torque. Belleville Spring Torque Limiter for simple release.  
- Limit torque 0.5 Nm up to 10000 Nm. 
- Speed range up to 13000 min-1

Force Limiters
Reliable axial overload protection in rods.
- Disengaging forces up to 140000 N
- Force limited in both directions.
- High response accuracy.
- Automatic re-engagement.

Couplings

Flange Couplings
Rigid, easily removable shaft coupling with backlash free cone clamping connections. 
- Shaft diameters between 50 mm and 350 mm. 
- Transmissible torques up to 625000 Nm.

Rigid Couplings
Rigid, easily removable shaft coupling with backlash free cone clamping connection.
- Shaft diameters between 14 mm and 100 mm. 
- Transmissible torques up to 7600 Nm.

Flexible Couplings
Large, allowed radial and angular misalignment. Minimum resiliency.  
- Shaft diameters between 5 mm and 140 mm. 
- Transmissible torques up to 8000 Nm.
- Speed range up to 13000 min-1

Flexible Couplings
Large, allowed radial and angular misalignment. Minimum resiliency.  
- Transmissible torques up to 8000 Nm.
- Speed range up to 4100 min-1

RCS

Remote Control Systems
for industry and construction machines, agriculture equipment, marine applications, commercial vehicles, racing cars and many other branches. 

Precision Clamping Fixtures

Bonded Disc Packs
Precision Clamping Fixtures based on the unique method of the RINGSPANN Clamping Disc.
- Clamping diameters between 7 mm and 200 mm. 
- Transmissible torques up to 8960 Nm.

Taper Collets
Precision Clamping Fixtures for clamping thin or thick walled work pieces on long clamping length. 
- Clamping diameters between 7.8 mm and 129.6 mm. 
- Transmissible torques up to 479 Nm.

Taper Sleeves
Precision Clamping Fixtures for clamping compact work pieces with short or long clamping lengths. 
- Clamping diameters between 9 mm and 206 mm. 
- Transmissible torques up to 680 Nm.

Flat Elements
Very short Precision Clamping Fixtures for clamping thick walled work pieces with large clamping diameter and very short clamping depths.
- Clamping diameters between 35 mm and 560 mm.
- Transmissible torques up to 9850 min.

Clamping Clutches
For rapid changes and precise clamping for profile rollers in printing presses in gravure and flexographic printing.
- High true running accuracy.
- High torsional rigidity.
- High axial rigidity.
- Compensation for axle and angular misalignment.